Vacuum Bubbling

Techniques and Applications

Yong Du Jun (Kongju National University, Republic of Korea)

$315

Hardback

Forthcoming
Pre-Order now

QTY:

English

CRC Press
23 May 2024

Fluid mechanics; Industrial chemistry; Chemical engineering; Mechanical engineering; Power generation & distribution

Vacuum Bubbling introduces the background and applications for generating bubbles under a vacuum condition, accomplished through depressurization without the need to heat water. It presents the advantage of utilizing vapor bubble in deaeration applications because the diffusion for degassing happens between the water body and micro vapor bubbles without the need of membrane or packing.

Instead of relying on massive heating, vacuum bubbling focuses on depressurization down to the level of saturated vapor pressure or below to secure vapor bubbles with virtually zero dissolved non-condensable gases, including oxygen. The book considers prospective applications, such as extracting high-oxygen-content air from water for underwater breathing, pretreatment of aircraft fuel before being pumped into a fuel tank system, and probable desalination applications through massive bubbling combined with low-grade renewable energy.

The book is intended for researchers in thermal fluids, heat and mass transfer, process engineering, and water treatment fields and industry professionals working in power generation, plant and process engineering, transportation, and energy.

By: Yong Du Jun (Kongju National University Republic of Korea)
Imprint: CRC Press
Country of Publication: United Kingdom
Dimensions: Height: 234mm, Width: 156mm,
ISBN: 9781032449364
ISBN 10: 1032449365
Pages: 156
Publication Date: 23 May 2024
Audience: College/higher education , Professional and scholarly , Primary , Undergraduate
Format: Hardback
Publisher's Status: Forthcoming

1. Introduction. 2. Solubility, Diffusion, and Evaporation. 3. Industrial Applications. 4. Concluding Remarks.

Yong-Du Jun joined the Faculty of Mechanical and Automotive Engineering at Kongju National University, Korea, in 1997, after receiving his doctoral degree in aerospace engineering from the University of Cincinnati. Prior to joining the faculty position at KNU, he worked in the field of propulsion system, engine aerodynamics, and turbomachinery erosion with CFD. His research at KNU focused on waste heat recovery, fluidized bed heat exchanger, heat transfer enhancement, and fouling reduction while longtime advising senior capstone design projects related to innovative utilization of renewables. He has a strong interest in the study of “vacuum bubbling” and the potential to minimize unnecessary energy use. Dr. Jun served as the chairman of the Division of Mechanical and Automotive Engineering and the dean of Academic Affairs of the Kongju National University.